top of page




87. D. Kang, Y. Lee, W. Kim, H.-R. Lee, S. Jung, "3D pulmonary fibrosis model for anti-fibrotic drug discovery by inkjet-bioprinting", Biomed Mater, 18, 015024, 2023. Link

86. S. Baek, H. Matsui, T. Mano, J. A. Park, Y. Jo, Y. Lee, S. Tokito, J. Kwon, and S. Jung, "Dual-gate thin film transistor lactate sensors operating in the subthreshold regime", Biosensors and Bioelectronics 222. 2023 Link

85. K. S. Bejoymohandas, H. U. Kim, S. Sohn. W. Choi, S. jung, F. Monti, and T. Park, "Cationic Iridium (III) Complexes with Benzothiophene-Quinoline Ligands for Deep-Red Light-Emitting Electrochemical Cells.", Inorganic Chemistr. 2022 Link


84. D. Kang, H. Lee, and S. Jung, "Use of a 3D inkjet-printed model to access dust particle toxicology in the human alveolar barrier", Biotechnology & Bioengineering. 2022 Link

83. J. A. Park, Y. Youm, H. -R. Lee, Y. Lee, S. L. Barron, T. Kwak, G. T. Park, Y. -C. Song, R. M. Owens, J. H. Kim, and S. Jung, "Transfer Tattoo-Like Cell Sheet Delivery induced by Interfacial Cell Migration", Advanced Materials. 2022 Link

82. H. Park, S. Yoo, J. C Won, S. Jung, & Y. H. Kim, "Reduction of the Error in the Electrical Characterization of Organic Field-Effect Transistors Based on Donor–Acceptor Polymer Semiconductors", ACS Applied Electronic Materials. 2022 Link

81. H. -R. Lee, H. G. Ryu, Y. Lee, J. A. Park, S. Kim, C. E. Lee, S. Jung, & K. -H. Lee, "Effect of Aronia Extract on Collagen Synthesis in Human Skin Cell and Dermal Equivalent", Oxidative Medicine and Cellular Longevity. vol. 2022, ID 4392256, 2022 Link

80. S. Veerapandian, W. Kim, J. Kim, Y. Jo, S. Jung, & U. Jeong, "Printable inks and deformable electronic array devices." Nanoscale Horizons. 7. 663-681. 2022 Link

79. S. Kim, M. Cho, & S. Jung, "The design of an inkjet drive waveform using machine learning." Sci Rep 12, 4841. 2022 Link

78. W. Kim,  S. Jung. "Static Response of Three-Dimensional and Printed Complementary Organic TFTs-Based Static Random-Access Memory." IEEE Electron Device Letters. vol 43, no. 3, pp.438-441. 2022 Link

77. S. Baek, Y. Lee, J. Baek, J. Kwon, S. Kim, S. Lee, K. Strunk, S. Stehlin, Christian Melzer, S. Park, H. Ko, S. Jung, "Spatiotemporal Measurement of Arterial Pulse Waves Enabled by Wearable Active-Matrix Pressure Sensor Arrays", ACS Nano , vol 16. no, 1, pp. 368–377. 2022 Link


76. J. Kwon, S. Beak, Y. Lee, S. Tokito, S. Jung, "Layout-to-bitmap conversion and design rules for inkjet-printed large-scale integrated circuits", Langmuir, pp. 0743-0763, 2021 Link

75. B. Park, S. Lee, J. Kwon, W. Kim, S. Jung & C. Kim, "Dual-pulse photoactivated atomic force microscopy", Sci Rep, vol. 11, no. 1, pp. 2045-2322, 2021 Link

74. S. Sohn, S. Kim, J.W. Shim, S. K. Jung, S. Jung, "Printed Organic Light-Emitting Diodes on Fabric with Roll-to-Roll Sputtered ITO Anode and Poly(vinyl alcohol) Planarization Layer", ACS Appl. Mater. Interfaces, vol. 13, no. 24, pp. 28521–28528, 2021  Link

73. A. A. Baabdulla, H. Now, J. A. Park, W. -J. Kim, S. Jung, J. -Y. Yoo, T. Hillen,  "Homogenization of a reaction diffusion equation can explain influenza A virus load data", J. Theor. Biol., vol. 527, pp. 110816, 2021 Link

72. W. Kim, J. Kwon, Y. Takeda, T. Sekine, S. Tokito, S. Jung, "Flexible and Printed Organic Nonvolatile Memory Transistor with Bilayer Polymer Dielectrics ", Adv. Mater. Technol., vol. 6, pp. 2100141, 2021 Link

71. H. -R. Lee, J. A. Park, S. Kim, Y. Jo, D. Kang, S. Jung, "3D microextrusion-inkjet hybrid printing of structured human skin equivalents ", Bioprinting., vol. 22, pp. e00143, 2021 Link

70. Y. Jo, J. Kwon, JL. van der Steen, AJ. Kronemeijer, S. Jung, "Programmable a-InGaZnO Gate Array with Laser-Induced Forward Transfer ", Flex. Print. Electron., vol. 6, no. 1, 2021 Link

69. D. Kang, J. A. Park, W. Kim, S. Kim, H. -R. Lee, W. -J. Kim, J. -Y. Yoo, S. Jung, “All-inkjet-printed 3D alveolar barrier model with physiologically relevant microarchitecture”, Adv. Sci., vol. 8, pp. 2004990-2005000, 2021 Link

68. Y. Lee, S. Jung, A. Plews, A. Nejim, O. Simonetti, L. Giraudet, S. D. Baranovskii, F. Gebhard, K. Meerholz, S. Jung, G. Horowitz and Y. Bonnassieux, "Parametrization of the Gaussian Disorder Model to Account for the High Carrier Mobility in Disordered Organic Transistor", Phys. Rev. Applied, vol. 15, no. 2, pp. 024021, 2021 Link

67. S. Kim, S. M. Jung, S. Jung, H. W. Shin, D. S. Hwang, "Sea urchin repelling Tannin– FeIII complex coating for ocean macroalgal afforestation", Chemosphere, vol. 263, pp. 128276, 2021 Link  


66. E. Kim, S. Choi, B. Kang, J. Kong, Y. Kim, W. H. Yoon ,H. -R Lee, S. Kim, H. -M Kim, H. Lee, C. Yang, Y. J. Lee, M. Kang, T. -Y Roh S. Jung, S. Kim, J. H. Ku & K. Shin, "Creation of bladder assembloids mimicking tissue regeneration and cancer", Nature, vol. 588, pp. 664-669, 2020 Link

65. W. J. Song, M. Kong, S. Cho, S. Lee, J. Kwon, H. B. Son, J. H. Song, D. -G Lee, G. Song, S. -Y Lee, S. Jung, S. Park, U. Jeong, "Stand‐Alone Intrinsically Stretchable Electronic Device Platform Powered by Stretchable Rechargeable Battery", Adv. Funct. Mater. , vol. 30, no. 50, pp. 2003608, 2020 Link

64. S. M. Jung, J. H. Lee, S. H. Han, W. B. Jeon, G. Y. Kim, S. Kim, S. Kim, H. -R Lee, D. S. Hwang, S. Jung, J. Lee and H. W Shin, "A new approach to the restoration of seaweed beds using Sargassum fulvellum", J Appl Phycol, vol. 32, pp. 2575-2581, 2020 Link

63. S. Jung, Y. Bonnassieux, G. Horowitz, S. Jung, B. Iñiguez and C. H. Kim,  “Advances in Compact Modeling of Organic Field-Effect Transistors”, IEEE J. Electron Devices Soc., vol. 8, pp. 1404-1415, 2020 Link

62. S. M. Jung, S. Kim, J. Park, H. -R Lee, S. Kim, H. -J. Jung, S. Jung, H. W. Shin, and D. S. Hwang, "Mechanical Stimuli enhance the Growth of Ulva fasciata (Chlorophyta) Spores, ACS Sustainable Chem. Eng, vol. 8, pp. 10073-10078, 2020 Link 

61. S. Baek, J. Kwon, T. Mano, S. Tokito, and S. Jung, "A Flexible 3D Organic Preamplifier for a Lactate sensor," Macromol. Biosci., vol. 20, no. 11, pp. 2000144, 2020 Link

60. W. H. Yoon, H. -R. Lee, S. Kim, E. Kim, J. H. Ku, K. Shin and S. Jung, "Use of inkjet-printed single cells to quantify intratumoral heterogeneity," Biofabrication, vol. 12, no. 3, 035030, 2020 Link

59. W. Kim, J. Kwon, Y. Lee, S. Baek and S. Jung, "Phase-Separated, Printed Organic Thin-Film Transistor-Based Nonvolatile Memory with Enhanced Data Retention," Adv. Mater. Technol., vol. 5, no. 7, pp 2000228-1-2000228-5, 2020 Link

58. S. Sohn, M. W. Ha, Y. -H. Kim, H. Ahn, S. Jung, S. -K. Kwon and Y. -H. Kim, "High-Efficiency Diphenylpyrimidine Derivatives Blue Thermally Activated Delayed Fluorescence Organic Light-Emitting Diodes," Front. Chem., vol. 8, no. 356, 2020 Link

57. Y. Lee, J. Kwon, S. Jung, W. Kim, S. Baek and S. Jung, "Reliable inkjet contact metallization on printed polymer semiconductors for fabricating staggered TFTs," Appl. Phys. Lett., vol. 116, no. 15, pp. 153301-1-153301-4, 2020 Link

56. J. A. Park, H. -R. Lee, S. -Y. Park, and S. Jung, "Self-Organization of Fibroblast-Laden 3D Collagen Microstructures from Inkjet-Printed Cell Patterns," Adv. Biosyst., vol. 4, no. 5, pp.1900280-1-1900280-9, 2020 Link



55. H. Park, S. Yoo, H. Ahn, J. Bang, Y. Jeong, M. Yi, J. C. Won, S. Jung, and Y. H. Kim, "Low-temperature solution-processed soluble polyimide gate dielectrics: From molecular-level design to electrically stable and flexible organic transistors," ACS Appl. Mater. Interfaces., vol. 11, no. 49, pp. 45949-45958, 2019 Link

54. Y. Jo, H. Park, H. Ahn, Y. H. Kim, and S. Jung, "Influence of bank geometry on the electrical characteristics of printed organic field-effect transistors," Flex. Print. Electron., vol. 4, no. 4, 2019 Link

53. H. -R. Lee, S. M. Jung, S. Yoon, W. H. Yoon, T. H. Park, S. Kim, H. W. Shin, D. S. Hwang and S. Jung, "Immobilization of planktonic algal spores by inkjet printing," Sci. Rep., vol. 9, no. 12357, 2019 Link

52. S. Baek, G. Y. Bae, J. Kwon, K. Cho, and S. Jung, "Flexible pressure-sensitive contact transistors operating in subthreshold regime," ACS Appl. Mater. Interfaces, vol. 11, no. 34, pp. 31111-31118, 2019 Link

51. S. Jung, J. Kwon, S. Tokito, G. Horowitz, Y. Bonnassieux, and S. Jung, "Compact modelling and SPICE simulation for three-dimensional, inkjet-printed organic transistors, inverters and ring oscillators," J. Phys. D: Appl. Phys., vol. 52, no. 44, pp. 44405-1-44405-8, 2019 Link

50. J. Kwon, H. Matsui, W. Kim, S. Tokito, and S. Jung, "Static and dynamic response comparison of printed, single- and dual-gate 3-D complementary organic TFT inverters," IEEE Electron Device Lett., vol. 40, no. 8, pp. 1277-1280, 2019 Link

49. S. Sohn, X. Wu, K. H. Park, H. Ahn, S. Jung, S. K. Kwon, and Y. H. Kim, "Highly-twisted pyrene derivative for pure-blue organic light emitting diodes," J. Ind. Eng. Chem., vol. 78, pp. 239-245, 2019. Link

48. J. Kwon, S. Jung, Y. H. Kim, and S. Jung, "Bi-Staggered Contact Geometry for Symmetric Dual-Gate Organic TFTs," IEEE Trans. Electron Devices, vol. 66, no. 7, pp. 3118-3123, 2019. Link

47. H. Park, J. Kwon, H. Ahn, and S. Jung, "Parylene Copolymer Gate Dielectrics for Organic Field-Effect Transistors," J. Mater. Chem. C, vol. 7, pp. 6251-6256, 2019. Link

46. H. Park, S. Yoo,  M. H. Yi, Y. H. Kim, and S. Jung, "Flexible and stable organic field-effect transistors using low-temperature solution-processed polyimide gate dielectrics," Org. Electron., vol. 68, pp. 70-75, 2019. Link

45. J. Kwon, Y. Takeda, R. Shiwaku, K. Cho, S. Tokito, and S. Jung, "Three-dimensional monolithic integration in flexible printed organic transistors," Nat. Comm., vol. 10, pp. 54-1-54-10, 2019. Link

44. Y. H. Ha, S. Sohn,  S. H. Han, B. G. Kim, H. Ahn, S. Jung, S. K. Kwon and Y. H. Kim, "New blue phosphorescence from trifluorosulfonyl-substituted iridium complexes," Dye. Pigments, vol. 163, pp. 684–691, 2019. Link


43. S. Sohn, N. Y. Kim, H. Ahn, S.K. Kwon, S. Jung, and Y. H. Kim, “Synthesis and characterization of heptaflurosulfonyl-substituted iridium complexes for blue phosphorescent organic light emitting diodes,”  Mol. Cryst. Liq. Cryst., vol. 676, no. 1, pp. 83-94, 2019 Link

42. H. Park, H. Ahn, J. Kwon, S. Kim, and S. Jung, "Parylene-Based Double-Layer Gate Dielectrics for Organic Field-Effect Transistors," ACS Appl. Mater. Interfaces, vol. 10, no. 44, pp. 37767–37772, 2018. Link

41. G. Y. Bae, J. T. Han, G. Lee, S. Lee, S. W. Kim, S. Park, J. Kwon, S. Jung, and K. Cho, “Pressure/Temperature Sensing Bimodal Electronic Skin with Stimulus Discriminability and Linear Sensitivity,” Adv. Mater., vol. 30, no. 43, pp. 1803388-1–1803388-8, 2018. Link

40. H. U. Kim, S. Sohn, W. Choi, M. Kim, S. U. Ryu, T. Park, S. Jung, and K. S. Bejoymohandas, “Substituents engineered deep-red to near-infrared phosphorescence from tris-heteroleptic iridium(III) complexes for solution processable red-NIR organic light-emitting diodes,” J. Mater. Chem. C, vol. 6, no. 39, pp. 10640–10658, 2018. Link

39. S. Sohn, K. H. Park, S. K. Kwon, H. K. Lee, H. Ahn, S. Jung, and Y. H. Kim, “Preferential Orientation of Tetrahedral Silicon-Based Hosts in Phosphorescent Organic Light-Emitting Diodes,” ACS Omega, vol. 3, no. 8, pp. 9989–9996, 2018. Link

38. J. Kwon, Y. Lee, Y. Jo, and S. Jung, “Fabrication of ultrathin low-voltage-driven printed organic circuits with anodized gate islands,” Org. Electron., vol. 62, pp. 77–81, 2018. Link

37. H. Park, J. Kwon, B. Kang, W. Kim, Y. H. Kim, K. Cho, and S. Jung,  “Control of Concentration of Nonhydrogen-Bonded Hydroxyl Groups in Polymer Dielectrics for Organic Field-Effect Transistors with Operational Stability,” ACS Appl. Mater. Interfaces, vol. 10, no. 28, pp. 24055–24063, 2018. Link

36. S. Yoon, J. A. Park, H. -R. Lee, W. H. Yoon, D. S. Hwang, and S. Jung, “Inkjet–Spray Hybrid Printing for 3D Freeform Fabrication of Multilayered Hydrogel Structures,” Adv. Healthc. Mater., vol. 7, no. 14, pp. 1800050-1–1800050-10, 2018. Link


35. J. A. Park, S. Jung, and E. Ma, "A study on multidisciplinary and convergent research using the case of 3D bioprinting(3D 바이오​프린팅 사례로 본 다학제간 융복합 연구에 대한 소고)," The Korean Society of Science and Art forum(한국과학예술포럼), vol. 30, pp. 151-161, 2017. Link

34. J. A. Park, S. Yoon, J. Kwon, H. Now, Y. K. Kim, W. J. Kim, J. Y. Yoo, and S. Jung, “Freeform micropatterning of living cells into cell culture medium using direct inkjet printing,” Sci. Rep., vol. 7, pp. 14610-1–14610-11, 2017. Link

33. J. Kwon, S. Kyung, H. Park, and S. Jung, "Inkjet-printed three-dimensional integrated circuits(잉크젯 인쇄 3차원 집적 회로)," Polym. Sci. and Technol.(고분자 과학과 기술), vol. 28, no. 1, pp. 26-32, 2017. Link

32. S. Kyung, J. Kwon, Y. Kim, and S. Jung, “Low-temperature, solution-processed, 3-D complementary organic FETs on flexible substrate,” IEEE Trans. Electron Devices, vol. 64, no. 5, pp. 1955–1959, 2017. Link


31. S. Sohn, B. H. Koh, J. Y. Baek, H. C. Byun, J. H. Lee, D. S. Shin, H. Ahn, H. K. Lee, J. Hwang, S. Jung, and Y. H. Kim, “Synthesis and characterization of diphenylamine derivative containing malononitrile for thermally activated delayed fluorescent emitter,” Dyes. Pigm., vol. 140, pp. 14–21, 2017. Link




30. S. Sohn, C. Lee, S. Jung, H. -M. Kim, "Hydrophilic Surface of SnO2 Doped SiO2 Film by Facing Target Sputtering Process", J.Nanosci, Vol. 16, no. 11, pp. 11558-11562(5), 2016. Link

29. Y. K. Kim, J. A. Park, W. H. Yoon, J. Kim, and S. Jung, “Drop-on-demand inkjet-based cell printing with 30-μm nozzle diameter for cell-level accuracy,” Biomicrofluidics, vol. 10, no. 6, pp. 064110-1-064110-11, 2016. Link


28. J. Kwon, Y. Takeda, K. Fukuda, K. Cho, S. Tokito, and S. Jung, “Three-dimensional, inkjet-printed organic transistors and integrated circuits with 100% yield, high uniformity, and long-term stability,” ACS Nano, vol. 10, no. 11, pp. 10324–10330, 2016. Link


27. J. Kwon, Y. Takeda, K. Fukuda, K. Cho, S. Tokito, and S. Jung, “Vertically stacked complementary organic field-effect transistors and logic circuits fabricated by inkjet printing,” Adv. Electron. Mater., vol. 2, no. 7, pp. 1600046-1-1600046-6, 2016. Link


26. I. You, B. Kim, J. Park, K. Koh, S. Shin, S. Jung, and U. Jeong, “Stretchable E-Skin apexcardiogram sensor,” Adv. Mater., vol. 28, no. 30, pp. 6359–6364, 2016. Link


25. S. Yoon, S. Sohn, J. Kwon, J. A. Park, and S. Jung, “Double-shot inkjet printing for high-conductivity polymer electrode,” Thin Solid Films, vol. 607, pp. 55–58, 2016. Link


24. J. Kwon, S. Kyung, S. Yoon, J. J. Kim, and S. Jung, “Solution-processed vertically stacked complementary organic circuits with inkjet-printed routing,” Adv. Sci., vol. 3, no. 5, pp. 1500439-1–1500439-6, 2015. Link




23. Y. K. Kim, S. Yoon, J. Park, and S, Jung, "Inkjet-based bioprinting(잉크젯 기반 바이오 프린팅)," Polym. Sci. and Technol.(고분자 과학과 기술), vol. 26, no. 5, pp. 416-422, 2015. Link


22. S. D. Hoath, W. K. Hsiao, G. D. Martin, S. Jung, S. A. Butler, N. F. Morrison, O. G. Harlen, L. S. Yang, C. D. Bain, and I. M. Hutchings, “Oscillations of aqueous PEDOT:PSS fluid droplets and the properties of complex fluids in drop-on-demand inkjet printing,” J. Nonnewton. Fluid Mech., vol. 223, pp. 28–36, 2015. Link


21. H. Yoo, H. H Choi, T. J. Shin, T. Rim, K. Cho, S. Jung, and J. J. Kim, “Self-Assembled, Millimeter-Sized TIPS-Pentacene Spherulites Grown on Partially Crosslinked Polymer Gate Dielectric,” Adv. Funct. Mater., vol. 25, no. 24,  pp. 3658–3665, 2015. Link


20. S. Sohn, M. J. Kim, S. Jung, T. J. Shin, H. K. Lee, and Y. H. Kim, “Molecular orientation of a new anthracene derivative for highly-efficient blue fluorescence OLEDs,” Org. Electron., vol. 24, pp. 234–240, 2015. Link

19. H. K. Huh, S. Jung, K. W. Seo, and S. J. Lee, “Role of polymer concentration and molecular weight on the rebounding behaviors of polymer solution droplet impacting on hydrophobic surfaces,” Microfluid. Nanofluid., vol. 18, no. 5–6, pp. 1221–1232, 2015. Link




18. L. Yang, B. K. Kazmierski, S. D. Hoath, S. Jung, W. K. Hsiao, Y. Wang, A. Berson, O. Harlen, N. Kapur, and C. D. Bain, “Determination of dynamic surface tension and viscosity of non-Newtonian fluids from drop oscillations,” Phys. Fluids, vol. 26, no. 11, pp.113103-1-113103-18, 2014. Link


17. A. Sou, S. Jung, E. Gili, V. Pecunia, J. Joimel, G. Fichet, and H. Sirringhaus, “Programmable logic circuits for functional integrated smart plastic systems,” Org. Electron., vol. 15, no. 11, pp. 3111–3119, 2014. Link


16. S. Jung, A. Sou, K. Banger, D. H. Ko, P. C. Y. Chow, C. R. McNeill, and H. Sirringhaus, “All-Inkjet-Printed, All-Air-Processed Solar Cells,” Adv. Energy Mater., vol. 4, no. 14, pp. 1400432-1–1400432-9, 2014. Link


15. S. D. Hoath, D. C. Vadillo, O. G. Harlen, C. Mcllroy, N. F. Morrison, W. K. Hsiao, T. R. Tuladhar, S. Jung, G. D. Martin, and I. M. Hutchings, “Inkjet printing of weakly elastic polymer solutions,” J. Nonnewton. Fluid Mech., vol. 205, pp. 1–10, 2014. Link




14. S. D. Hoath, J. R. Castrejon-Pita, W. K. Hsiao, S. Jung, G. D. Martin, I. M. Hutchings, T. R. Tuladhar, D. C. Vadillo, A. Simon, M. R. Mackley, C. Mcllroy, N. F. Morrison, O. G. Harlen, and H. N. Yow, "Jetting of Complex Fluids," J. Imaging. Sci. Technol., vol. 57, no .4, pp. 40403-1-40403-10, 2013. Link


13. S. D. Hoath, W. K. Hsiao, S. Jung, G. D. Martin, I. M. Hutchings, N. F. Morrison, and O. G. Harlen. "Drop Speeds from Drop-on-Demand Ink-Jet Print Heads," J. Imaging. Technol., vol. 57, no. 1, pp. 10503-1-10503-11, 2013. Link


12. S. Jung, A. Sou, E. Gili, and H. Sirringhaus, “Inkjet-printed resistors with a wide resistance range for printed read-only memory applications,” Org. Electron., vol. 14, no. 3, pp. 699–702, 2013. Link


11. S. D. Hoath, S. Jung, and I. M. Hutchings, “A simple criterion for filament break-up in drop-on-demand inkjet printing,” Phys. Fluids, vol. 25, no. 2, 2013. Link


10. S. Jung, S. D. Hoath, and I. M. Hutchings, “The role of viscoelasticity in drop impact and spreading for inkjet printing of polymer solution on a wettable surface,” Microfluid. Nanofluidics, vol. 14, no. 1–2, pp. 163–169, 2013. Link




9. S. D. Hoath, S. Jung, W. K. Hsiao, and I. M. Hutchings, “How PEDOT:PSS solutions produce satellite-free inkjets,” Org. Electron., vol. 13, no. 12, pp. 3259–3262, 2012. Link


8. F. Torrisi, T. Hasan, W. Wu, Z. Sun, A. Lombardo, T. S. Kulmala, G. W. Hsieh, S. Jung, F. Bonaccorso, P. J. Paul, D. Chu, and A. C. Ferrari, “Inkjet-Printed Graphene Electronics,” ACS Nano, vol. 6, no. 4, pp. 2992–3006, 2012. Link


7. S. Jung and I. M. Hutchings, “The impact and spreading of a small liquid drop on a non-porous substrate over an extended time scale,” Soft Matter, vol. 8, no. 9, pp. 2686–2696, 2012. Link


6. S. Jung, S. D. Hoath, G. D. Martin, and I. M. Hutchings, “Experimental study of atomization patterns produced by the oblique collision of two viscoelastic liquid jets,” J. Nonnewton. Fluid Mech., vol. 166, no. 5–6, pp. 297–306, 2011. Link


5. S. Jung, S. D. Hoath, G. D. Martin, and I. M. Hutchings, “A New Method to Assess the Jetting Behavior of Drop-on-Demand Ink Jet Fluids," J. Imaging. Sci. Technol., vol. 55, no. 1, pp. 10501-1-10501-6, 2011. Link


4. S. Jung, S. D. Hoath, G. D. Martin, and I. M. Hutchings, "Atomization patterns produced by the oblique collision of two Newtonian liquid jets," Phys. Fluids., vol. 22, no. 4, pp. 042101-1-042101-10, 2010. Link


3. D. C. Vadillo, T. R. Tuladhar, A. C. Mulji, S. Jung, S. D. Hoath, and M. R. Mackley, “Evaluation of the inkjet fluid’s performance using the ‘Cambridge Trimaster’ filament stretch and break-up device,” J. Rheol. (N. Y. N. Y), vol. 54, no. 2, pp. 261–282, 2010. Link


2. S. J. Jung, J. Y. Lee, and D. Y. Kim, “Novel phase-matching condition for a four wave mixing experiment in an optical fiber,” Opt. Express, vol. 14, no. 1, pp. 35-43, 2006. Link


1. S. J. Jung, J. Y. Lee, and D. Y. Kim, "Highly accurate wavelength scanned four-wave mixing experiment in an optical fiber and demonstration of retrieval of its linear and nonlinear optical parameters," J. Nonlinear Opt. Phys. Mater. vol. 15, no. 1, pp. 141-156, 2006. Link

~ 2012
ACS_NANO Final add_cover sample.tif
bottom of page